Franklin QUASAR® Floor Finish

High Solids, Variable Maintenance Floor Finish

Franklin Products: minimum purchase of $200 

Please contact us for a shipping quote.

Quasar® is a high solids, metal-crosslinked, water emulsion floor finish. Formulated for outstanding durability, Quasar® will outwear conventional finishes under the most demanding traffic and frequent scrubbing conditions. Excellent appearance levels may be achieved in a variety of maintenance programs. Use Quasar® on resilient surfaces and sealed wood.

Recommended on all types of resilient and non-resilient floors which include vinyl composition, rubber, asphalt, quarry, terrazzo and sealed wood floors.
NOTE: Old and very porous floors should be sealed with a Franklin sealer prior to application of Quasar®.

QUASAR®
High Solids, Variable Maintenance Floor Finish

• Self-sealing, high solids
• floor finish
• Outstanding durability
• Stands up to repeated
• detergent scrubbing
•  Works well for high
• traffic applications

Product Specifications

pH – 9.0 ± 0.3

Appearance – Off-White Emulsion

Fragrance – Mild polymeric

Freezing Point – About 32°F

% Total Solids – 30.8

% Non-Volatile Solids – 25.0 ± 0.5

Boiling Point – 212°F

Solubility in Water – Dispersible

Flash Point – None

Coverage – 2500 to 3000 sq. ft. per gallon (may vary due to differences in porosity of the surface)

Initial Application: 

1. Remove old sealer or finish using an appropriate Franklin stripper and following label directions.
2. Apply a thin, even coat of Quasar® using a clean finish mop.
3. Allow 20 to 30 minutes of drying time.
4. Apply 2-3 coats for best results allowing for adequate drying time between each coat.

 Maintenance: 

1. Dust mop the floor. Remove gum, labels, and other attached soil deposits with a long-handled scraper or putty knife.
2. Damp mop or autoscrub using a Franklin cleaner. Follow label directions for correct dilution and proper cleaning procedure.
3. Burnish the floor using a soft hair pad and high-speed floor machine to remove black scuff marks, scuffs and scrapes.

Product PDF's

Product Label

Safety Sheet

Technical Data Sheet